Simple car sticker application instructions – StickerLabs
Cart 0

Instructions

Please follow these simple application instructions for a perfect result on the first try:

Car sticker application instructions – step 1

Step 1

Clean the area thoroughly with rubbing alcohol or soap and water. Do not use Windex or similar products because it will leave a residue that will prevent the sticker from adhering well.
Car sticker application instructions – step 1

Step 2

Prepare the sticker by firmly rubbing a squeegee or credit card across the clear transfer tape. This removes any air bubbles and makes the sticker cling to the transfer tape.
Car sticker application instructions – step 1

Step 3

Peel the white paper backing off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat Step 2.
Car sticker application instructions – step 1

Step 4

Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card. For best results, wait 24 hours before moving to the next step. At least 6 if you just can't wait ?
Car sticker application instructions – step 1

Step 5

Slowly peel the clear transfer tape off at an angle. Be careful not to pull the sticker off the surface. If sticker pulls away from the surface repeat Step 4.